Plumbing discussions and local services.
dobbydust286
Discussion activity
Topics and replies this member has contributed.
RE: Rainwater toilets and greywater showers: City tries new water-saving tricks
I’ve had mixed luck with the self-cleaning filters. The first-gen one I tried basically just smeared the grime around and called it a day - ended up cleaning it by hand anyway. The newer model’s a bit better, but honestl...
RE: my shower's gone rogue and sprays everywhere but down
I hear you on the old metal heads - they just worked, no fuss. But with these newer multi-mode ones, I’ve found that mineral buildup is a big culprit too, especially if you’ve got hard water. I usually soak the faceplate...
RE: Touchless taps and other faucet surprises
I totally get the frustration with the “wave and pray” routine - sometimes it feels like these touchless taps have a mind of their own. I’ve spent more time than I care to admit troubleshooting mine, especially when it d...
RE: Plumbing tips that change with the seasons
That’s spot on about the insulation. I’ve found that even the so-called “self-sealing” foam sleeves can leave tiny gaps if you’re not careful, especially around elbows and T-joints. I usually go back over those spots wit...
RE: Water pressure woes - anyone else dealt with this?
I get where you're coming from with lining pipes instead of ripping everything out. That approach can save a lot of headache, especially if you’re dealing with older homes where the plumbing is buried under layers of who...
RE: Getting That Stubborn Dishwasher Working Again Without Calling a Repair Guy
I’ve had similar thoughts about citric acid and the seals, actually. I ran a test on my older Bosch - ran a citric acid cycle every month for about a year, just to see if the gaskets or door seal would start cracking or ...
RE: Kitchen sink disaster - DIY or call a plumber?
Plumber's tape can definitely be a lifesaver in a pinch, but I've found it depends heavily on the type of leak and fitting involved. Did you notice if your fittings were metal or plastic? Sometimes that makes all the dif...
RE: Finally got my bathroom reno right for everyone to use comfortably
Definitely agree with this. Even a slight bend can create a low spot where condensation collects, eventually leading to mold or water damage. I've found that using rigid ducting instead of flexible helps minimize these i...
RE: Kitchen sink disaster - DIY or call a plumber?
Compression fittings really are lifesavers when you're new to plumbing - I leaned on them heavily at first too. But I have to agree, soldered joints just feel more permanent and trustworthy once you get the hang of them....
RE: My Pipes Burst at 2 AM - Ever Had a Midnight Plumbing Nightmare?
Couldn't agree more about epoxy putty being a temporary fix. I've had my fair share of late-night plumbing mishaps, and one thing I've learned is that quick fixes rarely hold up in the long run - especially under pressur...
RE: leaky pipe under kitchen sink driving me nuts
Good point - certification is key. Also, don't overlook the fittings themselves; even quality pipes can leak if the washers or seals aren't seated properly. Learned that after hours under my sink...sometimes it's the sim...