"Just make sure they're certified for safety standards."
Good point—certification is key. Also, don't overlook the fittings themselves; even quality pipes can leak if the washers or seals aren't seated properly. Learned that after hours under my sink...sometimes it's the simplest thing causing all the trouble.
Also, don't overlook the fittings themselves; even quality pipes can leak if the washers or seals aren't seated properly. Learned that after hours under my sink...sometimes it's the simplest thing ...
Yep, fittings can be sneaky. Last time I had a leak, turned out the pipe threads weren't wrapped properly with plumber's tape...tiny detail, big headache. Did you check if yours were taped up well?
Had a similar issue last year—spent half a Saturday under the sink, convinced I'd tightened everything perfectly. Turned out I wrapped the plumber's tape backwards (yep, that's a thing apparently). Every time I tightened the fitting, it just unraveled the tape a bit more. Felt like a total genius when I figured that one out... Anyway, might be worth double-checking the tape direction if you're still having trouble.
Been there myself—spent way too long tightening fittings and redoing tape, only to realize the leak was actually coming from a tiny crack in the pipe itself. Felt pretty silly after all that effort. Might wanna give the pipe a quick inspection too, just in case it's something sneaky like mine was...
Good call checking the pipe itself. Can't tell you how many times I've seen folks chase their tails tightening fittings when the real culprit was a sneaky hairline crack or pinhole leak. Pipes can be deceptive, especially older plastic or thin metal ones—they look fine at first glance, but under pressure, tiny cracks open up just enough to drive you nuts. Don't beat yourself up over it though; happens to the best of us. Plumbing's funny like that...sometimes it's the simplest thing hiding in plain sight. At least now you're onto it and know exactly where to look next time something drips. Silver lining, right?