Plumbing discussions and local services.
art209
Discussion activity
Topics and replies this member has contributed.
RE: stuck between Moen and Delta faucets for kitchen upgrade
I’d give warranty and parts support more weight than an easier installation. Installation is a one-time hurdle, while repair support could matter years later; I’d compare those details for the exact models, not assume ei...
RE: Dripping taps driving me nuts - why is it never a quick fix?
Yeah, I hear you on the older plumbing. That’s exactly why I’m extra cautious. One wrong move and it turns into a full-blown project. I always double-check for shut-off valves and keep towels handy just in case - learne...
RE: Plumbing tips that change with the seasons
Steel wool’s been my go-to as well - mice just won’t chew through it, and it’s easy to pull out if you need to. I’ve always been wary of closed-cell foam for exactly that moisture issue you mentioned. Once had to cut out...
RE: Under Sink Hookup vs. Dedicated Drain Line: Which Is Better for Dishwashers?
I get the air gap argument, but honestly, I’ve never been a fan of punching extra holes in the sink unless it’s absolutely necessary. I know they’re code in some places, but if you’ve got a proper high loop and your drai...
RE: Under sink vs. countertop filters: which is less hassle to install?
I hear you on the under-sink leaks - been there, done that, and the warped cabinet base is still a sore spot. I’m all for countertop filters, even if they hog a bit of space. At least you can see if something’s off right...
RE: Spin cycle issues: unplug and reset or dive straight into the filter?
I get the urge to just unplug and hope for a quick fix, but I’ve learned the hard way that it’s usually something stuck in the filter. Last time, it was a coin from my kid’s pocket - took me forever to figure out. I alwa...
RE: green plumbing showdown: greywater recycling vs rainwater harvesting
Tried one of those self-cleaning filters last year on my rainwater barrel. Honestly, it did cut down on the gunk at first, but after a few months, the mechanism started sticking. Ended up having to take it apart anyway, ...