Water pressure woes—anyone else dealt with this?

Had something similar happen when I switched to a low-flow showerhead. Turns out there was sediment buildup in the pipes that got stirred up during installation. Did you check the little mesh filter inside the showerhead? Mine was clogged with tiny bits of debris—cleaning that out made a huge difference. Might also be worth checking if your home's pressure regulator valve is acting up...

Had a similar issue a while back—thought I'd discovered some ancient plumbing curse. Turns out, yep, that tiny mesh filter was the culprit. Amazing how something so small can tank your shower experience... Hang in there, you're definitely not alone with this one.

Yep, those tiny mesh filters can be sneaky little troublemakers. I've seen them cause more headaches than you'd believe—people often overlook them because they're so small and tucked away. But honestly, it's usually the simplest things that cause the biggest issues. Had a client once who replaced their entire showerhead, thinking it was faulty, only to find out later it was just a clogged filter screen. Felt bad for them, but hey, lesson learned, right?

Speaking of overlooked culprits, has anyone checked their pressure regulator valve lately? Those things can quietly fail or get out of adjustment over time, and suddenly you're left wondering why your shower feels like a drizzle. Might be worth a quick look if you're still having trouble...

Good points made above, especially about the pressure regulator valve. If you've already checked the showerhead filter and it's clean, here's how I'd approach it next:

1. Check other faucets in your home—are they also inconsistent? If yes, it's likely a whole-house issue.
2. Locate your pressure regulator (usually near your main shut-off valve) and test it with a pressure gauge. Normal household pressure should be around 40-60 psi.
3. If the reading fluctuates or is too low/high, adjust or replace the regulator.

Usually, that'll sort it out.