“I usually start with the easy stuff—reset, check for error codes if your model has a display, then move on to the filter and hoses.”
That’s honestly the best approach, especially if you’re trying to avoid unnecessary costs. I’ve wasted too much time (and water) tearing into things before just giving it a reset. It’s wild how often that works.
- Agree 100% on the voltage tester. I picked up a cheap one years ago and it’s saved me from a few surprises.
- The drain hose tip is gold. My last washer didn’t have one, but my current one does—makes cleaning the filter way less of a mess.
- About weird stuff in the pump: found a bobby pin and a button jammed in mine once. Still not sure how they got there, but it explained a lot.
If you’re seeing spin issues only with big loads, sometimes just redistributing the laundry helps. But if it’s random, yeah, could be filter or belt like you said. Either way, your checklist covers all the bases without jumping straight to expensive repairs.
Nice to see someone else who doesn’t just throw parts at the problem. Appliances really do have personalities... some days they just want attention.
Spin Cycle Issues: Unplug And Reset Or Dive Straight Into The Filter?
Man, I hear you on the “reset first” thing. I used to go full detective mode, pulling hoses and filters before even trying the easy stuff. Now I just unplug it, wait a minute, and more often than not, it magically fixes itself. Appliances are like toddlers—sometimes they just need a nap.
Funny thing with the weird objects in the pump... I once found a LEGO piece and a sock in mine. Still no clue how the LEGO got there since my kids are grown. Guess washers have secret portals or something.
I’m with you on not throwing money at it right away. But I’ll admit, sometimes I get impatient and start poking around before giving it a proper reset. Old habits die hard, I guess.
I totally get the urge to jump right in and start taking things apart, but I’ve learned the hard way that unplugging first is usually safer—and sometimes it’s all you need. One time I skipped that step and ended up with a small shock from a damp connection. Now I always go step by step: unplug, wait, check for obvious blockages, then move on. Anyone ever had a spin issue that only showed up when the load was heavy? I’m wondering if that’s more of a balance thing or something deeper in the filter or pump.
Spin Cycle Issues: Unplug And Reset Or Dive Straight Into The Filter?
- Seen this a lot with older washers in my units. Heavy loads causing spin problems usually point to either:
- Drum out of balance (especially if tenants overload or cram bedding in)
- Worn suspension rods or dampers
- Clogged pump/filter, but that’s less common unless there’s standing water
- Honestly, 9 times out of 10 it’s folks overloading the machine or not distributing stuff evenly. I’ve replaced a few pumps thinking it was something deeper, only to find socks wedged in the drum or the load just off-kilter.
- Not saying filters aren’t worth checking, but I’d start with the simple stuff before tearing it apart. And yeah, always unplug—learned that lesson after a nasty jolt years back... not fun.
Unplugging first is just good sense—never worth risking a shock, even if it feels like overkill. I’ve noticed a lot of spin issues come down to how people load the washer, too. If the drum’s packed with towels on one side, it’ll never spin right. I’d add that using high-efficiency detergent helps prevent residue buildup, which can also mess with sensors and balance. Filters are worth a look if there’s standing water, but otherwise, I’d check the basics before grabbing any tools.
